Manualshelf

User's Manual

ManualsBrandsLuxul Wireless ManualsElectronicsXAP Point Access
12345678910
luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460
User Guide
5
X
Installs Directly on a Wall or Shelf; or Can be Placed Discreetly in a Closet or
Other Non-Public Area
X
XenConnect™ Enabled for Maximum Compatibility and Performance with Other
Luxul Xen Products
1.1 Warnings
X
Read all installation instructions and site survey reports, and verify correct equip-
ment installation before connecting the XAP-1030 to its power source.
X
Remove jewelry and watches before installing this equipment.
X
Verify that the unit is grounded before connecting it to the power source.
X
Verify that any device connected to this unit is properly wired and grounded.
X
Connect all power cords to a properly wired and grounded electrical circuit.
X
Verify that the electrical circuits have appropriate overload protection.
X
Attach only approved power cords to the device.
X
Verify that the power connector and socket are accessible at all times during the
operation of the equipment.
X
Do not work with power circuits in dimly lit spaces.
X
Do not install this equipment or work with its power circuits during thunder-
storms or other weather conditions that could cause a power surge.
X
Verify there is adequate ventilation around the device, and that ambient tem-
peratures meet equipment operation specifications.
X
Products outside the approved configurations may be in violation of Part 15 of
the FCC Rules.
1.2 Site Preparation
X
Consult your site survey and network analysis reports to determine specific
equipment placement, power drops, and so on.
X
Assign installation responsibility to the appropriate personnel.
X
Identify and document where all installed components are located.
X
Provide a sufficient number of power drops for your equipment.
X
Ensure adequate, dust-free ventilation to all installed equipment.
X
Identify and prepare Ethernet and console port connections.
X
Verify that cable lengths are within the maximum allowable distances for optimal
and certified signal transmission.