User Manual

ManualsBrandsLuxul ManualsRoutersABR-4400

Simply Connected

Quick Install Guide

ABR-4400

AV Series

Multi-WAN Gigabit Router

Use the ABR-4400 to:



Add High Performance IP Network Routing

Functionality to your AV Rack Solutions



Create a Secure Guest Network with VLANs



Enable Secure Remote Access to the

Network via VPN



Optimize VoIP, Streaming Media and

Other Demanding Applications



Improve Network Reliability and Performance

with Multi-WAN Capability



Protect Your Network with Firewall

and Security Features

Use the ABR-4400 to:



Add High Performance IP Network Routing

Functionality to your AV Rack Solutions

Summary of content (8 pages)

PAGE 1
Simply Connected Quick Install Guide ABR-4400 AV Series Multi-WAN Gigabit Router Use the ABR-4400 to: Add High Performance IP Network Routing Functionality to your AV Rack Solutions Create a Secure Guest Network with VLANs Enable Secure Remote Access to the Network via VPN Optimize VoIP, Streaming Media and Other Demanding Applications Improve Network Reliability and Performance with Multi-WAN Capability Protect Your Network with Firewall and Security Features
PAGE 2
ABR-4400 Quick Install Guide Quick Install Guide Model Number: ABR-4400 AV Series Multi-WAN Gigabit Router © 2014 Luxul. All Rights Reserved. No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this manual is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design.
PAGE 3
Simply Connected PACKAGE CONTENTS The following items should be included in the box: ABR-4400 AV Series Multi-WAN Gigabit Router Power Cord Two L-shaped rack mounting brackets and screws and four rubber pads Quick Installation Guide NOTE: If any of the listed items are missing or damaged, please contact the reseller from whom you purchased for return/replacement.
PAGE 4
ABR-4400 Quick Install Guide LED Indicators Indicator Description Function POWER Power LED ON indicates the ABR-4400 has power. SYSTEM System Status LED FLASHING indicates the ABR-4400 is functioning correctly. ON indicates the ABR-4400 is booting. USB WAN/LAN Front OFF indicates the system is not functioning correctly.
PAGE 5
Simply Connected Computer supporting TCP/IP and equipped with a Web browser. Supported Web browser versions include I.E. 10.0, Firefox 3.6, Safari 5.0, Chrome 10.0, Opera 10.6 and up. The Web browser is used to configure the ABR-4400. Power must be AC 100-240V~ 0.1A 50/60Hz. Before Connecting to the Network The ABR-4400 can be rack-mounted or used as a desktop router.
PAGE 6
ABR-4400 Quick Install Guide Desktop Setup For use as a desktop device, position and apply the included rubber feet to the bottom of the ABR-4400. Attaching the Rubber Feet to the ABR-4400 CONNECTING DEVICES Before installing the ABR-4400, test the Internet connection to validate that it is functioning properly. When Internet access has been confirmed, follow the steps below for Router installation. 1.
PAGE 7
Simply Connected Windows Devices: 1. Select Start >> Run input cmd in the Run line then press enter. 2. At the newly opened command interface enter the following command: ping 192.168.0.1 and press enter. If connected properly, the system should report back a result as follows: packets sent=4, packets received=4, packets lost=0. This means the device is connected with a valid IP address. Login Parameter: Default IP address: Default user name: Default password: Default Value 192.168.0.
PAGE 8
Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment operation specifications. The ABR-4400 is designed for indoor use only. DO NOT place this outdoors. DO NOT install in or near hot or humid places, such as a kitchen or bathroom. Take care to minimize exposure to excessive heat or moisture. Small parts and plastic bags used for packaging may be harmful to small children.