Simply Connected Quick Install Guide AGS-1008M 8-Port Gigabit Switch Use the AGS-1008M to: Expand Your Home or Office Network with 8 Gigabit Ports Deliver Ethernet Functionality in Remote or Hard-to-Reach Locations Future Proof Your Network with Gigabit Speeds (10X Performance of Fast Ethernet) Set-up a Dedicated Network for Optimizing VoIP, Video, Security, or Gaming Applications.
AGS-1008M Quick Install Guide Quick Install Guide Model Number: AGS-1008M 8-Port Gigabit Switch © 2015 Luxul. All Rights Reserved. No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this manual is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design.
Simply Connected PACKAGE CONTENTS Please check the contents carefully after you open the packing: One: 8-Port Gigabit Switch One: Power Adapter Four: Magnetic Mounting Kit Four: Rubber Feet For Desktop Use One: Quick Install Guide If any of the listed items are missing or damaged, please contact the reseller from whom you purchased the AGS-1008M for return/replacement. HARDWARE DESCRIPTION Front Panel and The front panel of the AGS-1008M includes 8 Link/Activity LED’s and one power LED.
Quick Install Guide AGS-1008M LED Indicators The LED indicators of the AGS-1008M include 1 Power indicator and 8 Link/Activity indicators. These LED indicators show the operating status of the AGS-1008M and each switch connection.
Simply Connected PREPARING FOR INSTALLATION System Requirements Ethernet Cables to connect the AGS-1008M to Ethernet enabled devices Power should be 9V---1A. Installation Requirements Install the AGS-1008M in a stable/safe place to avoid any possible damage Inspect the AC power cord to ensure that it is correctly connected and undamaged. To avoid electric shock, DO NOT open the AGS-1008M housing (no user serviceable parts inside). Opening the AGS-1008M will void your warranty.
AGS-1008M Quick Install Guide Desktop Setup For use as a desktop device, position and apply the included rubber feet to the bottom of the AGS-1008M Installing the Rubber feet to the AGS-1008M AGS-1008M INSTALLATION Connecting Devices Use standard Ethernet CAT5, CAT5e or CAT6 cable to connect the AGS-1008M to a device as described below (CAT6 must be used in order to achieve full Gigabit bandwidth).
Simply Connected PoE Powered AC Powered Connecting to a Router or Other Switch 0 XBR-230 LAN r Enterprise WAN Route Dual-WAN 1 2 RESET LAN WAN SYS POWER 1 2 3 1 2 1 2 3 100M Internet Connecting the AGS-1008M to a Router or Switch When a device is properly connected, the Link/Activity LEDs for each port light up green/orange. Please refer to the LED Indicators section for definitions and troubleshooting. © 2015 Luxul. All Rights Reserved.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.