Simply Connected Quick Install Guide AGS-1024 24-Port Gigabit Switch Use the AGS-1024 to: Add 24 Gigabit Ports to Your AV Rack Solutions Future Proof Your Network with Gigabit Speeds (10X Performance of Fast Ethernet) Set-up a Dedicated Network for Optimizing VoIP, Video, Security, or Gaming Applications
AGS-1024 Quick Install Guide Quick Install Guide Model Number: AGS-1024 24-Port Gigabit Switch © 2015 Luxul. All Rights Reserved. No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this manual is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design.
Simply Connected PACKAGE CONTENTS Please check the contents carefully after you open the packing: One AGS-1024 24-Port Gigabit switch Power Cord Rack Mount Brackets and Screws Four Rubber Foot Pads Quick Installation Guide If any of the listed items are missing or damaged, please contact the reseller from whom you purchased the AGS-1024 for return/replacement.
AGS-1024 Quick Install Guide LED Indicators The front panel LEDs of the AGS-1024 include 1 Power indicator and 24 numbered Link/Activity indicators. These LEDs show the operating status of the AGS-1024 and each switch connection. LED Indicators The following chart shows the LED indicators of the AGS-1024 along with an explanation of the indicator’s properties: LED Status Description Front Power On This LED indicates that there is power to the AGS-1024.
Simply Connected CAUTION: Please use the correct power cord for your environment. If any voltage other than 100/240 is applied, it will result in damage to the AGS-1024. PREPARING FOR INSTALLATION System Requirements Network Connections: Ethernet Enabled Computer Web Browsers: Internet Explorer 6.0 or higher, Mozilla 1.0 or higher, Safari 1.
AGS-1024 Quick Install Guide AGS-1024 INSTALLATION Installing the AGS-1024 in a Rack The AGS-1024 can easily be installed in a standard 19” rack. The AGS-1024 includes two mounting ears for installing and stabilizing the switch. When attaching the mounting ears and installing the switch within a rack, please refer to the following illustration: Rack-Mounting the AGS-1024 Using the included screws, attach the mounting ears to each side of the switch.
Simply Connected Connecting the AGS-1024 to a Device When a device is properly connected, the Link/Activity LED for each port lights up. Please refer to the LED Indicators section for indicator definitions and troubleshooting. Connecting to a Router or Other Switch Connecting the AGS-1024 to Router or Switch When a device is properly connected, the Link/Activity LED for each port lights up. Please refer to the LED Indicators section for indicator definitions and troubleshooting. © 2015 Luxul.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
