Simply Connected Quick Install Guide XAP-1500 High Power Dual-Band Wireless 900N Low Profile Access Point Use the XAP-1500 to: Deliver Broader Wi-Fi Coverage and Eliminate Client Device Roaming Issues with Fewer APs Maximize Data Rates with Concurrent Dual-Band (2.
XAP-1500 Quick Install Guide Quick Install Guide Model Number: XAP-1500 High Power Dual-Band Wireless 900N Low Profile Access Point FCC ID: W59XAP1500 IC: 8584A-XAP1500 © 2015 Luxul. All Rights Reserved. No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this manual is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design.
Simply Connected PACKAGE CONTENTS The following items should be included in the box: One: XAP-1500 Dual Band Wireless AP One: Mounting Bracket and Hardware One: PoE Injector and Power Cord Two: Ethernet Cables One: Quick Install Guide NOTE: If any of the listed items are missing or damaged, please contact the reseller from whom you purchased for return/replacement.
XAP-1500 Quick Install Guide XAP-1500 Rear Port View PoE Injector LED Indicators Name Status Function PWR On Power is connected to the injector Off Injector is not receiving power PREPARING FOR INSTALLATION System Requirements Computer supporting TCP/IP and equipped with a Web browser. Supported Web browser versions include I.E. 9.0, Firefox 10.0, Safari 5.0, Chrome 10.0, Opera 10.6 and up. The Web browser is used to configure the XAP-1500. Power must be AC 100-240V~0.3A 50/60Hz.
Simply Connected XAP-1500 mounted on a ceiling XAP-1500 mounted on a wall Desktop Installation Attach the included rubber foot pads to the circular mounting bracket and place on any flat surface XAP-1500 on a desktop or flat surface WARNING!: The circular mounting bracket is required in all installation positions to allow for adequate airflow.
MOUNTING PATTERN
XAP-1500 Quick Install Guide AC Power: Connect the included AC Cord to the Power Input of the Included Injector first and then to the AC outlet. NOTE: T he XAP-1500 is not a router and will need to be connected to a network with a router in order to deliver Internet access.
Simply Connected Parameter: Default Value Default IP address: 192.168.0.16 Default user name: admin Default password: admin The Luxul XAP-1500 default IP addresss is 192.168.0.16. If the IP address of your router is not set to the 192.168.0.X network, a temporary static IP address must be set on the computer being used for configuration. To do so, set the IP address of the computer to the 192.168.0.X range and then use the default IP address of your XAP1500 as the Gateway/Router.
XAP-1500 Quick Install Guide WARNINGS AND SAFETY INFORMATION Verify that the electrical circuits have appropriate grounding and overload protection. Attach only approved power cords to the device. Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment operation specifications. The XAP-1500 is designed for indoor use only. DO NOT place this outdoors. DO NOT install in or near hot or humid places, such as a kitchen or bathroom.
Simply Connected The end user must avoid any extended human RF exposure directly in front of the device, up to a distance of 20cm, when unit is on. When servicing the equipment and selecting a location for the antennas, it is important to note that a minimum distance of 20cm is required between personnel and the device or antenna to comply with the radio frequency exposure limit.
NOTE: (1)The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.(2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable CE Declaration of Conformity: Hereby, Luxul, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020, declares that this Luxul XAP-1500 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.