Simply Connected Quick Install Guide XAP-310 Standard Power Wireless 300N Low Profile Access Point Use the XAP-310 to: Deliver Cost-effective Multi-AP Wi-Fi Coverage Create a Secure Guest Network Improve Data Rates with Multi-Stream Wireless 802.
XAP-310 Quick Install Guide Quick Install Guide Model Number: XAP-310 Wireless 300N Low Profile Access Point FCC ID: W59XAP310 IC: 8584A-XAP310 © 2015 Luxul. All Rights Reserved. No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this manual is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design.
Simply Connected PACKAGE CONTENTS The following items should be included in the box: One: XAP-310 Wireless AP One: Mounting Bracket and Hardware One: PoE Injector and Power Cord One: Ethernet Cables One: Quick Install Guide NOTE: If any of the listed items are missing or damaged, please contact the reseller from whom you purchased for return/replacement.
XAP-310 Quick Install Guide PoE Injector LED Indicators Name Status Function PWR On Power is connected to the injector Off Injector is not receiving power PREPARING FOR INSTALLATION System and Power Requirements Computer with supported Web browser. Minimum supported web browser versions include: I.E. 9.0, Firefox 7, Safari 5.0, Chrome 14 and up. The Web browser is used to configure the XAP-310. The POE injector power supply requires AC100V ~ 240V, 50Hz ~ 60Hz.
Simply Connected XAP-310 mounted on a ceiling XAP-310 mounted on a wall Desktop Installation Place on any flat surface XAP-310 on a desktop or flat surface Connecting the Ethernet Cable With the XAP-310 properly mounted, you can now plug the Ethernet Cable into the RJ-45 connector. NOTE: Category-5, super Category-5 or Category-6 unshielded twisted pair (CAT5/CAT5e/CAT6 UTP) cables can be used.
MOUNTING PATTERN
XAP-310 Quick Install Guide PoE Injector Setup Data In: Connect an Ethernet cable from your router or switch to the Data In port of the included PoE Injector Data & PWR Out: Connect an Ethernet cable from the Data & PWR Out port of the included PoE Injector to the PoE Port of the XAP-310 AC Power: Connect the included AC Cord to the Power Input of the Included Injector first and then to the AC outlet.
Simply Connected CONFIGURATION Default IP Address The XAP-310 is not equipped with an internal DHCP server. If connected to a Luxul Router, configuration will be automatic. Otherwise, the IP address of the computer for login and configuration will need to be manually configured. The table below lists the default parameters of the XAP-310. Parameter: Default Value Default IP address: 192.168.0.10 Default user name: admin Default password: admin The Luxul XAP-310 default IP addresss is 192.168.0.10.
XAP-310 Quick Install Guide ADVANCED SETTINGS For advanced settings information go to luxul.com WARNINGS AND SAFETY INFORMATION Verify that the electrical circuits have appropriate grounding and overload protection. Attach only approved power cords to the device. Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment operation specifications. The XAP-310 is designed for indoor use only. DO NOT place this outdoors.
Simply Connected Warning: Exposure to Radio Frequency (RF) Radiation: The radiated output of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized. The end user must avoid any extended human RF exposure directly in front of the device, up to a distance of 20cm, when unit is on.
Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. NOTE: (1)The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
