Simply Connected Quick Install Guide XFS-1084P 8-Port Fast Ethernet PoE Switch Use the XFS-1084P to: Cost-Effectively Expand a Wired Network Deliver Power and Data for up to Four PoE-Enabled Network Devices Simplify the Installation of IP Security, VoIP and other Network Applications
Quick Install Guide XFS-1084P Quick Install Guide Model Number: XFS-1084P 8-Port Fast Ethernet PoE Switch © 2014 Luxul. All Rights Reserved. No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this manual is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design.
Simply Connected FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CONTACT LUXUL Sales Technical Support P: 801-822-5450 E: sales@luxul.com P: 801-822-5450 E: support@luxul.
XFS-1084P Quick Install Guide HARDWARE DESCRIPTION Front Panel The front panel of the XFS-1084P includes 8 Link/Activity LEDs, one power LED, four PoE Status LEDs and one PoE Max LED. Please refer to the detailed description of these indicators in Section 2.2 below. XFS-1084P Front Panel View LED Indicators The LED indicators of the XFS-1084P include 8 Link/Activity LEDs, one power LED, four PoE Status LEDs and one PoE Max LED.
Simply Connected LED Color Status Description Power Green ON The XFS-1084P is powered — OFF Check the DC power supply to ensure proper connection to the outlet and the XFS-1084P. Red ON Maximum output wattage reached Red Flashing Maximum output wattage exceeded — OFF Maximum output wattage not reached ON Delivering PoE power to connected device Flashing Can indicate an Ethernet cable short or the connected device is attempting to draw more than 15.
XFS-1084P Quick Install Guide Rear Panel Layout The Rear Panel of the XFS-1084P includes eight 10/100Mbps RJ-45 Ethernet ports and one DC power port used for DC power input. XFS-1084P Rear Panel View CAUTION: Please use the included power supply. If a different power supply is used, it could damage the XFS-1084P PREPARING FOR INSTALLATION System Requirements 6 Ethernet Cables to connect the XFS-1084P to Ethernet enabled devices Power should be 48VDC @ 1.
Simply Connected Installation Requirements Install the XFS-1084P in a stable/safe place to avoid any possible damage Inspect the AC power cord to ensure that it is correctly connected and undamaged To avoid electric shock, DO NOT open the XFS-1084P housing (no user serviceable parts inside). Opening the XFS-1084P will void your warranty.
Quick Install Guide XFS-1084P XFS-1084P INSTALLATION Connecting Devices Use standard Ethernet CAT5, CAT5e or CAT6 cable to connect the XFS-1084P to a device as described below. The XFS-1084P will automatically adjust to the characteristics (speed/duplex) of the device to which it is connected. The PoE function is autosensing. As long as the powered device is 802.3af compliant, the switch will provide power. NOTE: Legacy PoE devices or 802.3at devices that need more that 15.
Simply Connected When a device is properly connected, the Link/Activity LEDs for each port lights up green. Please refer to the LED Indicators section for definitions and troubleshooting. Connecting to a Router or Other Switch Connecting the XFS-1084P to a Router and Devices When a device is properly connected, the Link/Activity LEDs for each port lights up green. Please refer to the LED Indicators section for definitions and troubleshooting.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.
