Manual

Simply Connected

Other trademarks and registered trademarks are the property of their respective owners

12345678 POWER

XGS-1008 Rear Panel View

CAUTION: Please use the included power supply. If a different power

supply is used, it could damage the XGS-1008

PREPARING FOR INSTALLATION

System Requirements



Ethernet Cables to connect the XGS-1008 to Ethernet enabled devices



Power should be AC 100-240V~ 0.1A(Max) 50/60Hz.

Installation Requirements



Install the XGS-1008 in a stable/safe place to avoid any possible damage



Inspect the AC power cord to ensure that it is correctly connected and

undamaged.



To avoid electric shock, DO NOT open the XGS-1008 housing (no user service-

able parts inside). Opening the XGS-1008 will void your warranty.



It is recommended that the XGS-1008 is positioned away from direct sun light



Ensure there is sufﬁcient space around the XGS-1008 for proper ventilation and

heat dissipation. It is recommended to have at least 4-6 inches around all sides.

Before Connecting to the Network

Before connecting the XGS-1008 to the network, please check the following:



Determine placement location. Do not place any heavy articles on the XGS-1008.