Manual

6
XGS-1008
Quick Install Guide
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
luxul.com | 801-822-5450

Ensure there is adequate space for proper heat dissipation and ventilation around
the XGS-1008.

Power socket should be within 4 feet of the XGS-1008.

Check power adapter to confirm safe and secure connection.
XGS-1008 INSTALLATION
Connecting Devices
Use standard Ethernet CAT5, CAT5e or CAT6 cable to connect the XGS-1008 to
a device as described below (CAT6 must be used in order to achieve full Gigabit
bandwidth). The XGS-1008 will automatically adjust to the characteristics (speed/
duplex) of the device to which it is connected.
12345678 POWER
Connecting the XGS-1008 to a Device
When a device is properly connected, the Link/Activity LEDs for each port lights
up green/orange. Please refer to the LED Indicators section for definitions and
troubleshooting.