Manual

111
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
CAUTION: TC Protect settings will be restored to defaults if the Switch
is restarted and you have not selected Save Confi g from
the main menu and saved your running confi guration to
non-volatile memory.
7.5 Application Example for STP Function
Network Requirements

Switch A, B, C, D and E all support the MSTP function.

A is the Central Switch.

Switches B and C are in the Convergence layer. Switches D, E and F are in the
Access layer.

There are 6 VLANs labeled VLAN101-VLAN106 in the Network.

All Switches are running MSTP and belong to the same MST region.

The Data in VLAN101, 103 and 105 are transmitted in the Spanning Tree with B as the
Root Bridge. The Data in VLAN102, 104 and 106 are transmitted in the Spanning Tree
with C as the Root Bridge.
Network Diagram
Figure 7-12 Network Diagram STP Function
Confi guration Procedure

Confi gure Switch A: