Manual

114
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
Step Operation Description
2
Enable STP function On Spanning Tree>>STP Confi g>>STP Confi g page,
enable STP function and select MSTP as your
STP version.
On Spanning Tree>>Port STP Confi g>>Port Confi g page,
enable STP on all Ports.
3
Confi gure the region name
and the revision of MST
region
On Spanning Tree>>MSTP Instance>>Region Confi g
page, confi gure the region as LUXUL and keep the
default revision setting.
4
Confi gure VLAN-to-Instance
mapping table of the MST
region
On Spanning Tree>>MSTP Instance>>Instance Confi g
page, confi gure VLAN-to-Instance mapping table. Map
VLAN 101, 103 and 105 to Instance 1. Then map VLAN 102,
104 and 106 to Instance 2.

The confi guration procedure for Switch E and F is the same as that of Switch D.
The Topology Diagram of the two Instances after the Topology has stabilized

For Instance 1 (VLAN 101, 103 and 105), the red paths in the following fi gure are con-
nected links; the gray paths are the blocked links.
Figure 7-13 Network Diagram Stabilized I

For Instance 2 (VLAN 102, 104 and 106), the blue paths in the following fi gure are con-
nected links; the gray paths are the blocked links.