Manual

135
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
CAUTION: Multicast Port Filter settings will be restored to defaults if the
Switch is restarted and you have not selected Save Config from
the main menu and saved your running configuration to non-
volatile memory.
NOTE: Multicast Port Filter Rules can only have effect on VLANs with IGMP
Snooping enabled.
NOTE: Multicast Port Filter Rules have no effect on Static Multicast IPs.
NOTE: Up to 5 IP-Ranges can be bound to one Port.
Configuration Procedure:
Step Operation Description
1
Configure IP-Range Configure an IP-Range to be filtered on
Multicast>>Multicast Filter>>IP-Range page.
2
Configure Multicast Filter
Rules for Ports
Configure Multicast Filter Rules for Ports on
Multicast>>Multicast Filter>>Port Filter page.
8.4 Packet Statistics
On this page you can view the Multicast Data traffic on each Port of the Switch. This
helps you to monitor the number of IGMP Messages in the Network.
Choose the menu Multicast>>Packet Statistics to load the following page.