Manual

XMS-1024P

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XMS-1024P Vers: 081314

2.3.2 Rear Panel

The rear panel of XMS-1024P features a power socket and a Grounding Terminal.

100-240V-50/60Hz 5.0A

Figure 2-2 Rear Panel

1 Grounding Terminal: The XMS-1024P already comes with a grounding mechanism

in the provided three prong power cable and power supply. You can also ground the

Switch with the provided Ground Cable. For detailed information, please refer to

Installation Guide.

1 AC Power Socket: Connect the female connector of the power cord to the Switch,

and the male connector to the AC power outlet. Please make sure the voltage of the AC

power source meets the requirements of the input voltage (100-240V~ 50/60Hz 0.6A).

3 LOGGING ON TO THE SWITCH

3.1 Login

1. To access the Web Management conﬁ guration, open a web-browser and type in the

default address 192.168.0.4 in the address ﬁ eld of the browser, then press the Enter key.

Figure 3-1 Web-browser

NOTE: To log in to the Switch, the IP Address of your PC should be set in the

same subnet of the Switch. The IP Address should be 192.168.0.x (where

“x” is any number from 1 to 254 excluding 192.168.0.4 of the Switch

or the IP of any other device on the Network), The Subnet Mask is

255.255.255.0. For the detailed instructions as to how to do this, please

refer to Appendix B.

2. A login window will appear, as shown in Figure 3-2. Enter admin for the User Name

and Password. Then click the Login button or press the Enter key.