Manual

158
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
The XMS-1024P Managed PoE Switch is a PSE (Power Sourcing Equipment). All RJ45 Ports
except the Console Port on the Switch support PoE (Power over Ethernet) which auto-
matically detects and supplies power for PDs (Powered Devices) complying with IEEE
802.3af and IEEE 802.3at. The maximum total power the Luxul PoE Switch can supply is
320W and the maximum power to each Port is 30W.
The PoE function can be confi gured in the sections PoE Confi g and PoE Time-Range.
10.1 PoE Confi g
All the RJ45 Ports on the Switch can be confi gured to supply power for Powered
Devices that comply with IEEE 802.3af and IEEE 802.3at. The power the system can
provide is limited so some attributes should be set to make full use of the power and
guarantee the adequate power to linked PDs. When the power exceeds the Maximum
power limit, the Switch may disconnect power to the PD linked to a Port with lower
priority. When a detected PD is disconnected, the Switch will stop supplying power via
the disconnected Port.
PoE Confi g is implemented on PoE Confi g and PoE Profi le pages.
10.1.1 PoE Confi g
On this page you can confi gure the parameters to implement PoE.
Choose the menu PoE>>PoE Confi g>>PoE Confi g to load the following page.
Figure 10-1 PoE Confi g