Manual

176

XMS-1024P

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XMS-1024P Vers: 081314

Create Extend-IP ACL

IP Protocol:

Select the IP Protocol to be contained in the Rule.

TCP Flag～

Select TCP Flag(s) when TCP is selected from the dropdown list of IP Protocol.

S-Port:

Conﬁgure the TCP/IP Source Port to be contained in the Rule when TCP/UDP

is selected from the dropdown list of IP Protocol.

D-Port:

Conﬁgure the TCP/IP Destination Port to be contained in the Rule when TCP/

UDP is selected from the dropdown list of IP Protocol.

DSCP:

Enter the DSCP value to be contained in the Rule.

IP ToS:

Enter the IP-ToS value to be contained in the Rule.

IP Pre:

Enter the IP Precedence value to be contained in the Rule.

Time-Range:

Select the Time-Range used by the Rule.

CAUTION: Extended-IP ACL Rule settings will be restored to defaults if

the Switch is restarted and you have not selected Save Conﬁg

from the main menu and saved your running conﬁguration to

non-volatile memory.

11.3 ACL Policy

Policies are used to control the Data packets that match the corresponding ACL Rules

by linking ACL Rules and actions together. The possible actions include; Port Mirroring,

data Condition, Redirection and QoS re-assignment.

Policy Conﬁg can be implemented using the ACL Policy Table, ACL Policy and ACL Policy

Rule pages.