Manual

186
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
12 NETWORK SECURITY
The Network Security module provides various protection measures and includes four
submenus: IP-MAC Binding, ARP Inspection, DoS Defense and 802.1X/RADIUS.
12.1 IP-MAC Binding
The IP-MAC Binding function allows you to bind an IP Address, MAC address, VLAN
ID and the connected Port Number. Based on the IP-MAC Binding Table and ARP
Inspection functions, you can control Network access and only allow the client devices
matching the Bound entries access the Network.
The following three IP-MAC Binding methods are supported by the Switch.

Manual: You can manually bind an IP Address, MAC address, VLAN ID and
Port Number.

Scanning: You can quickly collect the information of client devices in the LAN using
the ARP Scanning function and bind them with the collected information. You are
only required to enter the Range of IP Addresses to be scanned on the ARP
Scanning page.

DHCP Snooping: You can use the DHCP Snooping function to monitor the process of
the client device obtaining an IP Address from a DHCP Server for Automatic Binding.
These three methods are also the source of all IP-MAC Binding entries. The entries from
various sources should be different from one another to avoid conflicting settings.
Among the entries conflicting with each other, only the entry from the source with the
highest priority will take effect. The three sources Manual, Scanning and Snooping are
in descending order of priority.
The IP-MAC Binding function is implemented on the IP-MAC Binding Table, Manual
IP-MAC Binding, ARP IP-MAC Binding and IP-MAC DHCP Snooping pages.
12.1.1 IP-MAC Binding Table
On this page, you can view the information of the Bound entries.