Manual

204
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
Confi guration Procedure:
Step Operation Description
1
Bind the IP Address, MAC
address, VLAN ID and Port
Number of the Host together.
On the IP-MAC Binding page bind the IP Address, MAC
address, VLAN ID and Port Number of the Host together
via Manual Binding, ARP Scanning or DHCP Snooping.
2
Enable Protection for the
bound entry.
On the Network Security>>IP-MAC Binding>>IP-MAC
Binding Table page specify a Protect Type for the
corresponding bound entry.
3
Specify the trusted Port(s). On the Network Security>>ARP Inspection>>ARP
Detection page specify the trusted Port(s). Ports such as
Uplink Ports, Router Ports and LAG Ports, should be set
as Trusted Ports.
4
Enable ARP Detection feature. On the Network Security>>ARP Inspection>>ARP
Detection page Enable the ARP Detection feature.
12.2.2 ARP Defense
When Enabled, the Switch can terminate receipt of ARP packets for up to 300 seconds
when the transmission speed of valid ARP packets on the Port exceeds the defi ned
parameters thus avoiding an ARP Flood attack.
Choose the menu Network Security>>ARP Inspection>>ARP Defense to load the
following page:
Figure 12-14 ARP Defense