Manual

231
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
CAUTION: SNMP Community Config settings will be restored to defaults
if the Switch is restarted and you have not selected Save Config
from the main menu and saved your running configuration to
non-volatile memory.
NOTE: The default MIB View of SNMP Community Config is view Default.
Configuration Procedure:
If SNMPv3 is employed please use the following steps:
Step Operation Description
1
Enable SNMP function
globally.
On the SNMP>>SNMP Config>>SNMP Config page
enable the SNMP function globally.
2
Create SNMP View Config. On the SNMP>>SNMP Config>>SNMP View Config
page create an SNMP View. The default View Name is
viewDefault and the default OID is 1.
3
Create SNMP Group Settings. On the SNMP>>SNMP Config>>SNMP Group Settings
page create an SNMP Group for use with SNMPv3
and specify the SNMP View(s) with the associated
Access Levels.
4
Create SNMP User Config. On the SNMP>>SNMP Config>>SNMP User Config
page create an SNMP User Config assign the User to
a Group and configure the Auth/Privacy mode and
Auth/Privacy Password for the User.