Manual

234
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
Create Notification
Retry:
Specify the number of times the Switch will Retry an Inform Request. The
Switch will Retry the Inform Request. If it does not receive a response
from the Management Station within the Timeout interval, it will
terminate Retrying. If the number of Retry attempts reach the specified
maximum number of Retries, the Switch will stop attempting to
send the message.
Timeout:
Specify the maximum Time allowed for the Switch to wait for a response
from the Management Station before retrying a request.
SNMP Notification Table
Select:
Select the desired entry to Delete the corresponding
Management Station.
IP Address:
Displays the IP Address of the Management Station.
UDP Port:
Displays the UDP Port used for SNMP Notifications.
User:
Displays the User Name for Management Station.
Security Model:
Displays the Security Model of the Management station.
Security Level:
Displays the Security Level for the User (SNMP v3 only).
Type:
Displays the type of SNMP Notification.
Timeout:
Displays the maximum Time allowed for the Switch to wait for a response
from the Management Station before retrying a request.
Retry:
Displays the number of times the Switch Retries an Inform Request.
Operation:
Click the Edit button to modify the corresponding Entry and click the
Modify button to apply.
CAUTION: SNMP Notification settings will be restored to defaults if the
Switch is restarted and you have not selected Save Config from
the main menu and saved your running configuration to non-
volatile memory.
13.3 RMON
RMON (Remote Monitoring) is based on SNMP (Simple Network Management Protocol)
architecture, and allows you to monitor the Network. RMON is a commonly used
Network Management standard defined by Internet Engineering Task Force (IETF) and
is used to monitor the Data traffic across a Network segment up to and including the