Manual

245

User Guide

Other trademarks and registered trademarks are the property of their respective owners

LLDP Conﬁ g

SNMP

Notiﬁ cation

Interval:

Specify the interval of Trap Messages to be sent from the local Device to

Network Management system. The default value is 5.

Fast Start Count:.

When the Port’s LLDP state changes from Disable (Rx_Only) to Enable

(Tx&Rx or Tx Only), the fast start mechanism will be Enabled. This shortens

the transmit interval to one second, and several LLDPDUs will be sent out

(the number of LLDPDUs equals this parameter). The default value is 3.

CAUTION: LLDP Conﬁ g settings will be restored to defaults if the Switch

is restarted and you have not selected Save Conﬁ g from the

main menu and saved your running conﬁ guration to non-

volatile memory.

14.1.2 Port Conﬁ g

On this page you can conﬁ gure the Port(s) LLDP parameters.

Choose the menu LLDP>>LLDP Conﬁ g>>LLDP Port Conﬁ g to load the following page:

Figure 14-2 LLDP Port Conﬁ g