Manual

264
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
15.2.1 NTDP Device Table
On this page you can view the information of the devices collected by NTDP. Even if a
cluster is not established, you can manually collect NTDP information at any time to
manage and control devices.
Choose the menu Cluster>>NTDP>>NTDP Device Table to load the following page:
Figure 15-5 NTDP Device Table
The following entries are displayed on this screen:
Device Table
Device Type:
Displays the Device Type collected through NTDP.
Device MAC:
Displays the MAC Address of the Device.
Cluster Name:
Displays the Cluster Name of the Device.
Role:
Displays the Role the Device plays in the Cluster.

Commander: Indicates the Device that can confi gure and manage
all the devices in a Cluster.

Member: Indicates a Device that is managed in a Cluster.

Candidate: Indicates a Device that does not belong to any Cluster
though it can be added to a Cluster.

Individual: Indicates the device with cluster feature disabled.
Hops:
Displays the Hop Count from this Device to the Switch.
Neighbor Info:
Click the Detail link to view the detailed information for this Device
and its Neighbors
Collect Topology:
Click the Collect Topology button to collect NTDP
topology information