Manual

User Guide

Other trademarks and registered trademarks are the property of their respective owners

Choose the menu Switching>>Port Settings>>Port Conﬁ g to load the following page.

Figure 5-1 Port Conﬁ g

Here you can view and conﬁ gure the Port parameters.

Port Conﬁ g

Port Select:

Enter a port number and click the Select button to quick-select the

corresponding Port.

Select:

Place a check mark to select the desired Port(s) to be conﬁ gured.

Port:

Displays the Port number. Will be blank when selecting multiple ports.

Description:

Description of the Port for easy identiﬁ cation.

Status:

Allows you to Enable or Disable the Port.

Speed and Duplex:

Select the Speed and Duplex mode for the Port. The device connected

to the Switch should be in the same Speed and Duplex as the port it

is connected too. When “Auto” is selected Speed and Duplex will be

determined by auto-negotiation. For the SFP adapters the Switch does

not support auto-negotiation you will be required to set the port

to 1000MFD.

Flow Control:

Allows you to Enable or Disable the Flow Control feature. When Flow

Control is enabled the Switch will attempt to synchronize the speed

with its peer to avoid the packet loss caused by congestion.

LAG:

Displays the LAG Group number the Port belongs to.