Manual

51
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
The following entries are displayed on this screen:
LAG Config
Group Number:
Select a Group Number for the LAG.
Description:
Displays the description of LAG (not configurable by the user).
LAG Table
Member Ports:
Select the Ports to be added as a LAG member. Clearing all the Ports from
the LAG will delete the LAG Group.
NOTE: The LAG Group can be deleted by clearing its member Ports..
NOTE: Only a non-member Port can be added to a LAG Group. If a Port is
the member of a LAG Group or is Dynamically Aggregated as an LACP
member, the Port number will be grayed out and cannot be selected.
CAUTION: Static LAG settings will be restored to defaults if the Switch
is restarted and you have not selected Save Config from the
main menu and saved your running configuration to non-
volatile memory.
5.2.3 LACP Config
LACP (Link Aggregation Control Protocol) is defined in IEEE802.3ad and enables Dynamic
Link Aggregation by exchanging LACP packets with a partner. The Switch can dynami-
cally group similarly configured Ports into a single logical link, dynamically creating a
LAG Group.