Manual

61
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
NOTE: The MAC address in the Static MAC Table cannot be added to the
Filtering MAC Table or be bound to a Port dynamically.
NOTE: The Static MAC Address binding function is not available if the
802.1X/RADIUS/RADIUS feature is enabled.
5.4.3 Dynamic MAC
The Dynamic MAC Table updates automatically by learning new MAC Addresses and
Auto Aging of old MAC Addresses.
To fully utilize the Dynamic MAC Table which has a limited capacity, the Switch uses
Auto Aging. The Switch removes the MAC address entry related to a Network device if
no packet is received from the device within the Aging Time.
On this page, you can confi gure the Dynamic MAC parameters.
Choose the menu Switching>>MAC Address>>Dynamic MAC to load the
following page.
Figure 5-15 Dynamic MAC