Manual

63
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
CAUTION: Dynamic MAC settings will be restored to defaults if the
Switch is restarted and you have not selected Save Confi g
from the main menu and saved your running confi guration to
non-volatile memory.
5.4.4 MAC Filtering
MAC Filtering is used to control which packets are forwarded. MAC Filtering is added
or removed manually and is independent of the Aging Time. MAC Filtering allows the
Switch to fi lter the packets based on the source address or destination address. MAC
Filtering entries act on all Ports and in all corresponding VLANs.
Choose the menu Switching>>MAC Address>>MAC Filtering to load the
following page.
Figure 5-16 MAC Filtering