Manual

80
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
The following entries are displayed on this screen:
Create Protocol Template
Protocol Name:
Description name of the Protocol Template.
Ether Type:
Enter the Ethernet Protocol Type in the Protocol Template.
Frame Type:
Select a Frame Type for the Protocol Template.
Protocol Template Table
Select:
Select the desired entry(ies).
ID
Displays the ID of the Protocol Template.
Protocol Name:
Displays the Name of the Protocol Template.
Ether Type:
Displays the Ethernet Protocol Type of the Protocol Template.
Frame Type
Displays the Frame Type of the Protocol Template.
CAUTION: Protocol Template settings will be restored to defaults if the
Switch is restarted and you have not selected Save Config
from the main menu and saved your running configuration to
non-volatile memory.
NOTE: The Protocol Template bound to VLAN cannot be deleted.
Step Operation Description
1
Set the link type of the
member Port.
On the VLAN>>802.1Q VLAN>>Port Config page set the
link type for the Port based on its Connected Device.
2
Create a VLAN. On the VLAN>>802.1Q VLAN>>VLAN Config page click the
Create button to create a VLAN. Enter the VLAN ID , a
Description for the VLAN and specify its member Ports.
3
Create or Select a Protocol
Template.
On the VLAN>>Protocol VLAN>>Protocol Template
page Create or Select the Protocol Template before
configuring the Protocol VLAN.
4
Create a Protocol VLAN. On the VLAN>>Protocol VLAN>>Protocol VLAN page
select the Protocol Type and enter the VLAN ID to create
a Protocol VLAN.