Simply Connected Quick Install Guide XMS-2624P 26-Port/24 PoE+ Gigabit Managed Switch Use the XMS-2624P to: Connect up to 24 IP Cameras or Other PoE-Enabled Devices (Max Output 370 Watts) Add 802.
XMS-2624P Quick Install Guide Quick Install Guide Model Number: XMS-2624P 26-Port/24 PoE+ Gigabit Managed Switch © 2015 Luxul. All Rights Reserved. No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this manual is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design.
Simply Connected PACKAGE CONTENTS The following items are included in the box: XMS-2624P 26-Port/24 PoE+ Gigabit Managed Switch Power Cord Rack Mount brackets and screws Four rubber pads Quick Installation Guide If any of the listed items are missing or damaged, please contact the Distributor from whom you purchased for return/replacement.
XMS-2624P Quick Install Guide LED indicators show the working status of the switch. The following table describes the LED functionality: Indicator Name Description System Green Flashing Indicates that the XMS-2624P is running normally. Green On Booting up or indicates a malfunction. Contact technical support. Red On This LED indicates the XMS-2624P in power on system initialization process. Off Indicates that the XMS-2624P is in startup and initialization process or is not on.
Simply Connected Rear Panel XMS-2624P Rear Panel View Power Input: Please use the included power cable PREPARING FOR INSTALLATION System Requirements Ethernet Cables to connect the XMS-2624P to Ethernet enabled devices Computer equipped with a Web browser. Supported Web browser versions include Microsoft I.E. 9.0, Firefox 3.6, Safari 5.0, Chrome 6.0, Opera 10.6 and up. The Web browser is used to configure the XMS-2624P. Power must be AC 100-240V~ 4.7A 50/60Hz.
XMS-2624P Quick Install Guide XMS-2624P INSTALLATION Installing the XMS-2624P in a Rack The XMS-2624P can easily be installed in a standard 19” rack. The XMS-2624P includes two mounting ears for installing and stabilizing the switch. When attaching the mounting ears and installing the switch within a rack, please refer to the following illustration: Rack-Mounting the XMS-2624P Using the included screws, attach the mounting ears to each side of the switch.
Simply Connected For the RJ-45 ports, Category-5, super Category-5 or Category-6 unshielded twisted pair (CAT5/CAT5e/CAT6 UTP) should be used. NOTE: For best results, it is recommended that Category-6 shielded twisted pair be used to ensure stable data transmission at 1000 Mbps. Optical fiber/cable should be selected based on the wavelength of the SFP optical module to be used. Make sure only one Uplink channel exists between switches or between the XMS2624P and a router.
ADVANCED SETTINGS For login and advanced settings information go to luxul.com WARNINGS AND SAFETY INFORMATION ff Verify that the electrical circuits have appropriate grounding and overload protection. ff Attach only approved power cords to the device. ff Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment operation specifications. ff The XMS-2624P is designed for indoor use only. DO NOT place this outdoors.