Simply Connected Quick Install Guide XVS-F5 5-Port Mini Fast Ethernet Switch Use the XVS-F5 to: Extend Your Home or Office Network Deliver Fast Ethernet Connectivity at the Network Edge Set-up a Dedicated Network for Optimizing VoIP, Video, Security, or Gaming Applications (when used with a managed switch)
XVS-F5 Quick Install Guide Quick Install Guide Model Number: XVS-F5 5-Port Mini Fast Ethernet Switch © 2015 Luxul. All Rights Reserved. No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this manual is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design.
Simply Connected FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CONTACT LUXUL Sales Technical Support P: 801-822-5450 E: sales@luxul.com P: 801-822-5450 E: support@luxul.
Quick Install Guide XVS-F5 XVS-F5 Front Panel View LED Indicators The LED indicators of the XVS-F5 include 5 Link/Activity LEDs, one power LED, four PoE Status LEDs and one PoE Max LED. These LED indicators show the operating status of the XVS-F5 and each switch connection.
Simply Connected PoE Status LINK/ACT Green Green — 100Mbps Green — ON Delivering PoE power to connected device OFF No PoE power being delivered ON Indicates the XVS-F5 is connected at 100Mbps. Blinking Indicates the XVS-F5 is transmitting/receiving data packets at 100Mbps. OFF Indicates the port is not connected to a device. ON 100Mbp device connected OFF 10Mbp device connected Rear Panel Layout The Rear Panel of the XVS-F5 includes eight 10/100Mbps RJ-45 Ethernet ports.
Quick Install Guide XVS-F5 PREPARING FOR INSTALLATION System Requirements Ethernet Cables to connect the XVS-F5 to Ethernet enabled devices Power should be AC 100-240V~ 1.4A(Max) 50/60Hz. Installation Requirements Install the XVS-F5 in a stable/safe place to avoid any possible damage Inspect the AC power cord to ensure that it is correctly connected and undamaged To avoid electric shock, DO NOT open the XVS-F5 housing (no user serviceable parts inside).
Simply Connected Power socket should be within 4 feet of the XVS-F5 . Check power adapter to confirm safe and secure connection. XVS-F5 INSTALLATION Connecting Devices Use standard Ethernet CAT5, CAT5e or CAT6 cable to connect the XVS-F5 to a device as described below. The XVS-F5 will automatically adjust to the characteristics (speed/duplex) of the device to which it is connected. The PoE function is autosensing. As long as the powered device is 802.3af compliant, the switch will provide power.
for each port lights up green. Please refer to the LED Indicators section for definitions and troubleshooting. FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
