Simply Connected Quick Install Guide XWR-1750 Dual-Band Wireless AC1750 Gigabit Router Use the XWR-1750 to: Deliver Next Generation 802.11ac Gigabit Wi-Fi with Speeds up to 1750Mbps Maximize Data Rates with Concurrent Dual-Band (2.
XWR-1750 Quick Install Guide Quick Install Guide Model Number: XWR-1750 Dual-Band Wireless AC1750 Gigabit Router FCC ID: W59XWR1750 IC: 8584A-XWR1750 © 2014 Luxul. All Rights Reserved. No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this manual is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design.
Simply Connected PACKAGE CONTENTS The following items should be included in the box: XWR-1750 Dual-Band Wireless AC1750 Gigabit Router 3 Dual-Band RPSMA Male Antennas Ethernet Cable Power Adaptor Quick Installation Guide NOTE: If any of the listed items are missing or damaged, please contact the reseller from whom you purchased for return/replacement.
XWR-1750 Quick Install Guide Rear Panel XWR-1750 Rear Panel View Antenna Ports: 3 RPSMA female antenna ports to connect the included antennas Power Input: Power adapter included NOTE: To hard reboot the router, remove the power adapter. Wait 10 seconds and re-apply power. USB 1 -2 Ports: 2 USB 2.
Simply Connected PREPARING FOR INSTALLATION System Requirements Computer supporting TCP/IP and equipped with a Web browser. Supported Web browser versions include I.E. 9, Firefox 25, Safari 5, Chrome 30, and up. The Web browser is used to configure the XWR-1750. Power must be AC 100-240V~ 1.0A 50/60Hz. XWR-1750 INSTALLATION Desktop Installation For use as a desktop device, position the XWR-1750 on a desk or other horizontal surface with adequate room around the XWR-1750 for ventilation.
XWR-1750 Quick Install Guide MOUNTING PATTERN 6 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.
Simply Connected © 2015 Luxul. All Rights Reserved.
XWR-1750 Quick Install Guide CONFIGURATION Default IP Address The XWR-1750 default IP address is 192.168.0.1. This address can be changed. However, for hassle free installation of other plug and play Luxul devices, it is recommended that the default IP value be maintained. Parameter: Default IP address: Default user name: Default password: Default Value 192.168.0.1 admin admin Connect a Client Device Use a computer or mobile device to connect via Ethernet or wireless to the XWR-1750.
Simply Connected RESET BUTTON Used to restore factory default settings CAUTION: Holding the RESET button longer than 10 seconds will result in a factory reset To reset to factory defaults, press and hold the Reset button for 15 seconds. A factory reset will take one minute or more to complete. A successful factory reset is indicated when all of the Port LEDs flash once. When the System LED starts flashing again the unit is ready.
XWR-1750 Quick Install Guide Unauthorized antennas, modifications, or attachments could cause damage and may violate regulatory approvals. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate the equipment. The equipment version marketed in the U.S. is restricted to usage of channels 1-11 only.
Simply Connected FCC Statement—Wireless FCC 2.4GHz & 5GHz 802.11abgnac Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Industry Canada (RSS-Gen Issue 2) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareilsradio exempts de licence.