Owner manual

12
FEATURES (Con’t)
 Open calibration capacity
 Three modes: Normal, Setting and Internal Auto
Calibration
 RS232 function
 Error message indication:
2.2 Application, conformity
2.2.1 Correct use of the weighing machine
The maximum allowable load of the weighing machine must
never be exceeded; otherwise the weighing machine may be
damaged.
In using the weighing machine in combination with other
appliances as well as with appliances produced by other
manufacturers, the appropriate regulations for the safe use of
the relevant attachments and their application in accordance
with instructions must be observed.
2.2.2 Conformity
The weighing machine has been manufactured and tested in
accordance with the standards and recommendations set out
in the declaration of conformity.
Err-O
Err-Z
Err-S
Err-C
Overload
Exceed zero track range when power is on
Unstable when power is on
Calibration code is not enough or operation error
Low battery indication