Professional Weighing Equipment MCT SERIES intelligent weighing machine MID COUNTING SCALE WITH CHECK-WEIGHING FUNCTION Operating Manual 1
Declaration of Conformity Declaration of conformity for apparatus with CE mark We hereby declare that the product to which this declaration refers conforms to the following standards. Electronic scale: MCT Mid Counting Scales Imperial version Metric version MCT-3 MCT-7 MCT-16 MCT-33 MCT-66 MCT-1500 MCT-3000 MCT-7500 MCT-15000 MCT-30000 Mark applied Date: 14. 11.
Identification Customer Service USA LW Measurements LLC, 3510 Industrial Drive, Unit H Santa Rosa, CA 95403 USA Tel: (707) 542-2185 FAX: (707) 542-3285 EUROPE LW Measurements Europe Ltd Chalkwell Park House 700 London Road Westcliff-on-Sea Essex SS0 9HQ United Kingdom Tel: 01702-476700 Fax: 01702-477380 ASIA LW Measurements PTY Ltd Block 1004, Toa Payoh North #03-16 Singapore 318995 Tel: (65) 6458 3438 HP: (65) 8119 3401 http://lwmeasurements.
Introduction What you should know about these Operating Instructions: Tree® Professional Weighing Equipment products are simple to operate. Nevertheless, you should read through these operating instructions in their entirety, so that you can make optimum use of the full potential and the diverse possibilities of the weighing machine in your daily work.
Contents Section 1 Heading Safety 1.1 Representation and symbols 1.2 Safety recommendations 2 Your weighing machine 2.1 Construction and functions 2.1.1 Construction of the weighing machine 2.1.2 Functions of the weighing machine 2.2 Application, conformity 2.2.1 Correct use of the weighing machine 2.2.2 Conformity 2.3 Data and parameters 2.3.1 Technical data 3 Getting started with your weighing machine 3.1 3.2 3.3 3.4 3.5 3.6 3.
1 Safety 1.1 Representations and symbols Important instructions, which involve safety, are highlighted with the appropriate mark: 1.2 Safety recommendations When using the weighing equipment in surroundings with increased safety requirements, the corresponding regulations must be observed. The weighing machine may only be used with the power adapter supplied exclusively for use with the weighing machine.
2 Your weighing machine 2.1 Construction and functions 2.1.1 Construction of the weighing machine The weighing machine consists of the weighing machine body (1), the scale-pan (2), the adapter (3) and this operating manual. Figure 2.
2.1.2 Functions of the weighing machine The MCT Series are high-quality electronic precision weighing machines designed to function as counting scales and check-weighers with the following specifications 1. Imperial weight unit version Model number Capacity Division Weighing pan Size MCT-3 3 lb 0.0001 lb 185 x 255mm MCT-7 7 lb 0.0002 lb 185 x 255mm MCT-16 16 lb 0.0005 lb 185 x 255mm MCT-33 33 lb 0.001 lb 185 x 255mm MCT-66 66 lb 0.002 lb 185 x 255mm Package 3 (Standard carton) 27.
2. Metric weight unit version Model number Capacity Division Weighing pan Size MCT-1500 1500 g 0.05 g 185 x 255mm MCT-3000 3000 g 0.1 g 185 x 255mm MCT-7500 7500 g 0.2 g 185 x 255mm MCT-15k 15 kg 0.0005 kg 185 x 255mm MCT-30k 30 kg 0.001 kg 185 x 255mm Package (Standard carton) 3 27.5×19×21(cm ) Package 3 (Master carton) 4 Units in one box: 64.
Figure 2.
2.2 Application, conformity 2.2.1 Correct use of the weighing machine The weighing machine may only be used for the weighing of solid-materials and of liquids filled into secure containers. The maximum allowable load of the weighing machine must never be exceeded, otherwise the weighing machine may be damaged.
3 Getting started with your weighing machine 3.1 Unpacking the equipment The machine is delivered in an environmentally-friendly carton, specifically developed for this precision instrument, which provides optimum protection for the balance during transportation. We suggest that you retain the original packaging in order to avoid transportation damage if re-shipping or transporting the balance and to allow the unit to be stored in the best conditions if it is out of operation for an extended period.
3.3 Assembling your weighing machine The weighing machine is delivered in partly dismantled condition. Assemble the individual components in the following sequence: Place the unit holder in position and add the weighing pan Insert the power adapter cable plug into the socket at the rear of the balance. 3.4 Choice of a suitable location The environment in which your weighing machine is used is very important. Air movement, temperature changes, vibrations, direct sunlight, etc.
3.6 Leveling the weighing machine To function properly, the balance must be precisely horizontal. The balance is fitted with one bubble level. and adjustable feet for level-control, with the aid of which it is possible to compensate for small height differences and / or any unevenness in the surface on which the balance is positioned. The screw feet must be adjusted so that the air bubble is precisely in the center of the sight glass of the bubble level (see Fig.
4 Working with the application menu using the Intelligent Key-Pad 4.1 Display messages and key functions 4.1.1 Display messages 1. The STABLE icon indicates when the readings stabled. 2. The ZERO icon indicates when the weights tared to zero. 3. The LO-BAT icon indicates when running out of battery. 4. The PCS icon indicates when pieces counting function applied. 4.1.2 key functions 1. On/Off (icon) key turns the weighing machine on or off 2. MODE key changes the weight units, kg, g, lb, oz, lb:oz 3.
4.2 Program options Besides performing accurate simple weighing, your versatile weighing machine can also perform pieces counting 4.2.1 Pieces counting - Press ON/OFF (icon) to turn on the scale - Wait for "0" to appear on the display. - If necessary, press ZERO key to set the display to “0” - Press PCS key to enter PCS mode, the display will show P=X X - Press MODE key to select XX value (10, 20, 50, and 100) - Place a given number of samples on the pan (Samples should be 10, 20, 50 or 100 pieces).
5 Calibration - Using an External Calibration Weight: Calibration is required when the weighing machine is initially installed or if the scale is moved to a substantial distance from the original location. 10 minutes warm up of scale is always needed before calibration.
6 Maintenance and service The weighing machine must be treated carefully and cleaned regularly. It is a precision instrument. For maintenance-work, the balance must be separated from the power supply (remove power adapter plug from socket). Also ensure that the balance cannot be reconnected to the power supply during the work by a third party. Take care during cleaning that no liquid penetrates into the appliance.
7 Transport, storage 7.1 Transportation and shipping of the weighing machine Your weighing machine is a precision instrument. Treat it carefully. Avoid shaking, severe impacts and vibration during the transportation. Take care that there are no marked temperature fluctuations during the transportation and that the weighing machine does not become damp (condensation). 7.