PIZA SCALE INSTRUCTION MANUAL PIZA M-1-0612
SAFETY PRECAUTIONS All safety messages are identified by the following the words "WARNING" and "CAUTION". These words mean the following: Important information to alert you to a situation △WARNING that might cause serious injury and damage to your balance if instructions are not followed. △CAUTION Important information that tells how to prevent damage to equipment. When using the scale/balance, the following safety precautions should always be followed.
PARTS DESCRIPTIONS: SPECIFICATIONS ·TOP Model number Capacity Division PIZA 12 12lb 0.002lb PIZA 25 25lb 0.005lb Platter size ON/OFF HOLD UNIT ZERO 320×310mm / 12.6 x 12.2 inch Net/Gross weight 5.6kg(12.4lb)/6.4kg(14.1lb) Individual carton: 510x375x140mm / 20x14.6x5.5 inch Packaging 4 Units in one box : master carton: 525x610x393mm / 20.6x24x15.5 inch Operating Temperature 0-40℃(32-104 F) Power source 6×AA Batteries or AC/DC Adaptor 9v/100mA(optional) PRINT ·Display 1.
FUNCTION SETTINGS Features: 1. Press and hold [HOLD] key then press [ON/OFF] key to turn on the scale, the 1. Display options:5 digital LCD display will show A-ON or A-OFF, press [ZERO] key to select on or off (ON 2. Power:AC adapter 9V 100mA 3. Auto back light (selectable) 4. Auto off (selectable) 5. Operating Temperature:0-40℃(32-104℉) 6. Operating Humidity:25%~95%RH means auto power off function activate, OFF means auto power off function inactivate). 2.
When to calibrate 8. Press [UNIT] key, the display will show Fd 0.5 or Fd 3 or Fd 5 or Fd 10. (press Note: Calibration is done in factory. Don't re-calibrate the Scale, unless it is not accurate. 9. Press [UNIT] key, the display will show Ft 1 or Ft 2 or Ft 3 or Ft 4. (press [ZERO] key to select animal scale filter time among 1,2,3,4) Calibration: A. [ZERO] key to select animal scale filter range among 0.
interface: 9 10 11 12 13 14 15 16 17 18 19 20 CR LF 5 0 0 k g 8 7 6 5 + : W 4 3 2 1 Exampla: 50kg Weight information . Unit formation CR LF + _ Mode:Simplex Asynchronous Serial Baud rate: 9600 Data Bit:8 Parity Bit:NONE Stop Bit:1 Data Format:ASCII Transmission Information Format: 20 Byte ,blank=20H : 3. weight information 2. RS232 Transmission Agreement: := 1.
6