Operation Manual

FlarmView Version 1.01 November 2013
Page 11 of 21
All targets are displayed as a glider symbols. User can change that symbol to another type.
It's alsp possible to change object color, depending on relative altitude to us. All received
targets (Flarm or PCAS) are marked with same type of symbol except undirected targets, for
which we don't know from which direction they are comming from. Flarm and PCAS targets
can be separated only by their ID.
4.6.1 Selecting and switching between targets
Target could be selected ussing Up/Down (middle two) buttons. If target dissapear whe it's
selected, FlarmView will still indicate some information about last selected target.
Information about distance, altitude and vario will dissapear. If target will appear back, we
will trace it again. In case that we have enabled function Lock to nearest target, selection of
tagets will not be possible See Ch.4.9.3)
4.7 Flarm Warning
If Flarm warnings are enabled the following is a typical screen display. First two are normal
flarm warnings, third one is is for undirected/PCAS warning, Last one is for obstacle warning.