Operation Manual

FlarmView Version 1.01 November 2013
Page 20 of 21
7 Firmware Update
Firmware updates of the LXNAV FlarmView can be easily carried out using the SD card.
Please visit our webpage www.lxnav.com and check for the updates.
You can also subscribe to a newsletter to receive news about the LXNAV FlarmView
automatically.
7.1 Updating LXNAV FlarmView
• Download the latest firmware from our web site, section downloads/firmware
http://www.lxnav.com/download/firmware.html.
• Copy fview.fw file to FlarmView’s SD card.
• Turn on FlarmView
• Firmware update will take few seconds.
If update procedure is interrupted of any case. LXNAV FlarmView will not start. It
will cycle in bootloader application with red message “Flash integrity failed”.
Bootloader application is waiting to read the right firmware from SD card. After
successful firmware update LXNAV FlarmView will start again.
If FlarmView gives you message “Flash integrity failed”, means that firmware
update was not successful and need to be repeated.