Operation Manual

LX90xx system Version 4.0 February 2014
Page 100 of 151
The user can also disable or enable a particular wind method. It is recommended to have
all methods enabled.
Once the wind is modified to suit your needs press the OK button to accept the wind values.
The dialogue will exit automatically.
If the CANCEL button is pressed the wind dialogue will be closed without applying the
changed values.
6.5.6.5 Airspace
The Airspace dialogue shows a list of airspace zones in the vicinity of your position. Vertical
and horizontal distances are calculated to all airspace zones in the list.
The VIEW button toggles the list views. When the STATUS button is pressed the status of
the selected airspace zone will toggle between OFF always, OFF today, OFF hh:mm and
enabled.
If the EDIT button is pressed a new dialogue will open where you can modify properties for
the selected zone. Refer to Chapter 6.1.5.3 for more details.
When a zone is alarmed the distance will be coloured orange.
6.5.6.6 Mark
If you press the MARK button a new waypoint will be created with the current latitude and
longitude and elevation based on the terrain database. The waypoint name is generated
from the current date and time separated by the minus character and preceded by an
underscore.