Operation Manual

LX90xx system Version 4.0 February 2014
Page 114 of 151
6.7.3 Multiple start points
On some competitions, multiple start points are used for start. Press STARTS button to
open multiple starts dialog.
First start point will be grey out. This is point, which is defined in task. Add as many start
points as required. Later it is possible to cycle through start points with CYCLE button.
6.7.4 Modifying Zones
Now it is time to modify the observation zones. Select a point and press the ZONE button.
A new dialogue with the observation zone for the selected point will open.
Using parameters in the zone dialogue it is possible to describe all types of observation
zones. Angle12 defines the orientation of the observation zone. Available parameters for
Direction are:
 Symmetric: the most common selection for a turn point.