Operation Manual

LX90xx system Version 4.0 February 2014
Page 4 of 151
6.1.1 QNH and RES 32
6.1.1.1 QNH* 32
6.1.1.2 Safety Altitude 33
6.1.1.3 Altitude source 33
6.1.1.4 Magnetic Variation 33
6.1.1.5 ETA/ETE Calculation 33
6.1.1.6 Soaring Start* 33
6.1.2 Flight Recorder 34
6.1.3 Vario Parameters* 35
6.1.4 Display 36
6.1.5 Files and Transfers 37
6.1.5.1 Uploading User Airspace and Waypoints 37
6.1.5.2 Uploading Airspace and Airports Database 38
6.1.5.3 Managing Airspace 38
6.1.5.4 Managing Waypoints 40
6.1.5.5 Managing Airports 41
6.1.5.6 Managing Airports Using the LX Asapt editor 42
6.1.5.7 Managing Maps 43
6.1.5.8 Managing Flights 44
6.1.5.9 Flight Declaration 44
6.1.5.10 Formatting a SD Card 45
6.1.5.11 Managing PDF documents 45
6.1.6 Graphics 47
6.1.6.1 Terrain and Map 47
6.1.6.2 Airspace 48
6.1.6.3 Waypoints and Airports 49
6.1.6.4 Glider and Track 50
6.1.6.5 Optimization 51
6.1.6.6 Task 52
6.1.6.7 Flarm 52
6.1.7 Sounds* 54
6.1.7.1 Audio Settings* 54
6.1.7.2 Voice* 55
6.1.7.3 Alarms* 55
6.1.8 Observation Zones 57
6.1.9 Optimization 59
6.1.10 Warnings 59
6.1.10.1 Airspace Warnings 60
6.1.10.2 Altitude Warning 61
6.1.10.3 Flarm Warnings 62
6.1.10.4 Time Alarm 63
6.1.11 Units 63
6.1.12 Hardware* 64
6.1.12.1 Vario unit settings – TE compensation* 64
6.1.12.2 Vario Indicator Setup* 66
6.1.12.3 Vario indicator V5* 67
6.1.12.4 Vario indicator V80mm 68
6.1.12.5 LCD and USB-D Vario indicator 69
6.1.12.6 Flarm* 70
6.1.12.7 Compass* 71
6.1.12.8 Rear Seat or Front Seat 71
6.1.12.9 Remote stick 72