Operation Manual

LX90xx system Version 4.0 February 2014
Page 40 of 151
Press EDIT to edit data for the selected zone. Airspace type, class and altitude borders can
be modified in this dialogue.
6.1.5.4 Managing Waypoints
Select the Waypoints and Tasks menu item and press the SELECT button. A list of all
available waypoint files will be shown on the screen.
Multiple files can be selected. All checked files will be shown on the graphics page and used
in the near mode calculation, if the waypoint is of the proper type (airport or outlanding
place). However, only one file can be the active file. The active file is primary used for task
creation.
When a waypoint file from USB or SD card is selected, it will be available only, if
SD card or USB stick is inserted in main display unit.
Selecting waypoint files on SD card or USB allows you to create portable profiles,
which can be transferred from one device to another device.
Press the ACTIVE button to mark the selected file as active.
Press the DELETE button to remove the selected file from the internal storage of main
display unit.