Operation Manual

LX90xx system Version 4.0 February 2014
Page 52 of 151
6.1.6.6 Task
Use this dialogue to define how a task is drawn in task mode.
Task colour defines the colour of task lines. Obs.zone colour defines colours for
observation zones. Use the ZOOM selector knob to change transparency of area. 100%
means completely transparent and only the outline will be drawn. 0% means completely
solid (not recommended). When Show flown task is checked also the flown task will be
drawn. This might be useful when flying assigned area tasks.
The Show selected zone only item controls whether all task observation zones are to be
displayed or, if there is only one, then that alone will be shown.
6.1.6.7 Flarm
The system can be equipped with the internal or external FLARM module. If your device is
equipped with FLARM this menu will let you to modify presentation of the Flarm radar
display.
Flarm radar is not available if competition or privacy modes are active. Refer to
Chapter 6.1.12.6.
Checking Show Flarm object will enable display of aircraft detected by FLARM.
Colours are designed to present three values. The colour for aircraft more than 100 meters
above your current altitude is defined by the Above Colour item. The colour for aircraft
more than 100 meters below your current altitude is defined by the Below Colour item.