Operation Manual

LX90xx system Version 4.0 February 2014
Page 63 of 151
6.1.10.4 Time Alarm
Use this dialogue to define three independent time alarms that will be triggered at specified
periods.
6.1.11 Units
Use this dialogue to specify units, UTC time offset and type of ballast input.
The lower-middle button will toggle all units between imperial and metric units.
Glider ballast can be entered as:
 overload factor, which is defined as:
weightgliderREFERENCE
ballastWaterweightPilotweightgliderEmpty
overload
..
.... 

 Load, which is entered in kg/m
2
or lb/ft
2
.
 Weight of water ballast. If this option is used the weights of the glider and pilot
must be entered. Refer to Chapters 6.1.13 and 6.1.2 for more details of how to enter
glider and pilot weights.