Operation Manual

LX90xx system Version 4.0 February 2014
Page 68 of 151
Green T symbol represents last thermal average value.
White bar displays arc between minimum and maximum vertical speed value in last 20
seconds in white colour or minimum and maximum g-load in red colour, depending on
settings.
Press RESET-G button to reset g-meter.
Most innovative feature of V5 vario system is an upgrade. Firmware for vario unit
can be easily upgraded by customer with SD card. See Chapter 9 for more
details.
6.1.12.4 Vario indicator V80mm
V80 Vario indicator is without mechanical needle. It features 3.5” colour screen with
320x240 pixels resolution on which user selectable data are displayed and needle is drawn.
Each V80 vario indicator is identified by a serial number, which is also displayed on
hardware menu. Therefore literally unlimited number of vario indicators can be connected
to RS485 bus and each of them can be setup separately.
V80 vario indicator basic screen is split into two parts, white ring with needle and vario
scale. Additionally to needle, blue MacCready triangle, green thermal average T and red
diamond for 20 seconds average are shown. In the middle four user-customizable numbers
are show. When middle button on V80 indicator is pushed display will toggle between
numeric display, Flarm radar display and artificial horizon screen.