Operation Manual

LX90xx system Version 4.0 February 2014
Page 69 of 151
Press middle button for long time to enter setup menu. In setup menu it is possible to setup
graphic interface for Flarm radar screen and numeric values. Numeric screen can also be
setup on main display unit.
6.1.12.5 LCD and USB-D Vario indicator
This is type of the older vario indicator. An LCD vario indicator or USB-D vario indicator
consists of:
 Needle
 Two numerical displays (upper and lower).
 Labels and indicators.
These following functions can be set (see next picture):
 Needle: vario needle (Vario, SC, Netto or Relative).
 SC Ring: Displays speed command at all times.
 Upper Numeric Display: Integrator, time, flight time, task remaining time. Upper line;
the parameter displayed can be configured in both Vario and SC modes.
 Vario Mode Indicator: Shows current flight mode (vario or speed command).
 Lower Numeric Display: Altitude (NN altitude), Distance (distance to the navigation
point), Glide diff. (final glide altitude difference), Speed (TAS), Leg speed (speed on
leg), QNH (ft) (NN altitude in ft), Flight levels. Lower line; the parameter displayed can
be configured in both Vario and SC modes.
The labels will automatically be displayed depending on the current function. The BAT
warning will be displayed when the supply voltage is below 11 volts.