Operation Manual

LX90xx system Version 4.0 February 2014
Page 72 of 151
When flying an assigned area task it is worth not having the task checkbox
checked. This will allow one pilot to play with “what if” scenarios. Once a proper
direction is found you can send the task to the other device using the SEND
action in task mode.
6.1.12.9 Remote stick
When a remote stick is connected to the system, it is possible to define type of remote stick
via this menu. In case LXNAV remote stick with six buttons is connected, user can specify
functionality of function button. There are several options available for function button:
 Toggle vario range will toggle between vario range 2.5m/s, 5m/s or 10m/s.
 Toggle map settings will toggle between two stored map settings.
 SELECT will call airport select menu or waypoint select menu or task edit depending
on current navigational page.
 MC/BAL will open MacCready and ballast dialog.
 MAP will open map properties dialog.
 WIND will open wind selection dialog.
 AIRSPACE will open airspace zones dialog.
 MARK will create a waypoint or marker at current position.
 FLARM will display a list with all Flarm objects in vicinity.
 PAN will set navigational screen into pan mode.
 EVENT will mark an event into recorded IGC file
 ROT.FAI will rotate FAI triangle area, if shown on navigational screen.
 TEAM opens dialog to enter team partner code.
Check Use stick for front seat if there are two remote sticks installed and system without
rear seat device (e.g. Pipistrel Taurus)