Operation Manual

LX90xx system Version 4.0 February 2014
Page 79 of 151
6.1.16 Passwords
There are several passwords which run specific procedures as listed below:
 00111 displays information about the system and its sensors.
 01043 will perform “Auto zero” and set indicated speed to zero.
 30000 browses through installed files (use with caution).
 41000 first or forced update of Flarm.
 42000 update of Flarm through PC port (default).
 44441 shows debug information.
 55556 will enable Condor simulator input via the PC port.
 89891 is used to initiate the firmware update procedure.
 99999 will erase all flights stored on the main display unit.
6.1.17 Admin mode
Admin mode is very powerful tool to disable particular functionality of the system for normal
users. It is designed for club usage, where one person is taking care of all instruments.
To enable Administration mode, check Enable admin mode check box. Next step is to
enter and re-enter administration password. Once password is entered it si possible to
define, which actions normal user can do.
There are several actions, which can be disabled for normal user:
 Change Safety Altitude, user will not be able to set saftey altitude.
 Change Report Point, user will not be able to set report point, if is is already set.