Operation Manual

LX90xx system Version 4.0 February 2014
Page 82 of 151
Waypoint data can be modified. Refer to Chapter 6.6.1 for more details. Press the OK
button to save a marked waypoint or press CANCEL to exit without saving. Press GOTO
button to navigate immediately to selected point.
6.2.2 Position Report
This page shows your position report relative to an arbitrary selectable point. Use this page
when you are talking to ATC.
Press the REPORT button to select a report point. Radials will always be magnetic and
distance will always be in nautical miles. If you press the MARK button a new waypoint will
be created.