Operation Manual

LX90xx system Version 4.0 February 2014
Page 93 of 151
 Flarm will display a list with all visible Flarm objects. You can select one and use it for
navigational purposes.
 Pan will change main display unit into panning mode. In this mode user can move over
map in all directions.
 Rot.FAI will rotate the FAI area if it is enabled. This option is not shown if it is not
enabled.
 Event is used to log an event. The recording rate will be increased to 1 second for one
minute. A message “Event marked” will be displayed on the screen.
 Send is available only when we have a two-seat configuration with a rear-seat device.
Press this button to send the current navigational point to the rear seat device. This
action will force a change of navigational target for the selected navigation mode on the
rear seat device.
 Layout will run page layout editor. In layout editor, it is possible to modify layout of
current navigational page.
 Night will reduce backlight to level acceptable for flying in very dark conditions.
 Off will switch off the instrument. The message “ Device is shutting down. Please wait.
“will be displayed.
The main display unit can also be powered off by pressing the upper-left button
until the message “switching off” appears.