user manual

these power management modes.
• <2nd> <F4> and <2nd> <F5> – The Display Brightness functions are not used as the
display brightness is adjusted by the buttons on the VX7 control panel.
• <2nd> <F6> and <2nd> <F7> – The Contrast functions are not used as the contrast is
not adjustable on the TFT display on the VX7.
• <2nd> <F8> and <2nd> <F9> – The Volume control keys are not used as volume is
adjusted via the Microsoft Windows CE .NET Control Panel.
• <2nd> <F10> – Please see “Keyboard Backlight” later in this section for details on
toggling the keyboard backlight.
NumLock and the VX7
The 60-key keyboard does not have a NumLock indicator or key. NumLock can be toggled
On or Off using the <2
nd
> <SHIFT> <F10> keypress sequence.
The default value for NumLock is On.
The warmboot behavior of NumLock can be configured. Please refer to the “VX7 Reference
Guide” for more information.
Keyboard Backlight
The LXE keyboard keys are backlit with LEDs. The backlight is manually controlled using the
<2
nd
> + <CTRL> + <F10> keypress sequence.
Keyboard LEDs
The VX7 keyboard has two (2) LED indicators.
CAPS LED
This LED indicates the state of the keyboard CapsLock mode. If CapsLock is enabled this LED
is illuminated green. When CapsLock is off, the LED is dark.
Press <2
nd
> then <F1> to toggle CapsLock On and Off.
The default value of CapsLock is “Off”. For information on configuring the behavior of
CapsLock after a reboot, please refer to the “VX7 Reference Guide”.