User's Manual

104 Settings | Control Panel Options
MX3X Reference Guide E-EQ-MX3XRG-H
Keys
Figure 3-14 Scanner Properties / Keys Tab
See the “MX3-RFID Reference Guide” when using an MX3X with an RFID Module.
The Keys tab sets up what happens when one of the Scan keys are pressed. Note that the two keys
can do the same or different functions.
Assigned Function
Disabled When either scan key is set to Disabled, it does nothing when pressed.
Scan
When set to “Scan” the integrated scanner is activated. If no integrated scanner
is present, the Scan selection is greyed out.
Enter
When set to “Enter”, both the Enter key and the (Scan button) / Enter key
perform the same function.
Tab
When set to “Tab”, both the Tab key and the (Scan button) / Tab key perform
the same function.
Field Exit
5250 devices only. When a Scan key is set to “Field Exit”, the key press
causes the cursor to exit an input field. A field exit key press functions as a
Pause key press on non-5250 devices.
Virtual
When set to “Virtual”, the Virtual Left scan key produces an F20 and the
Virtual Right scan key produces an F21.
RFID or
RFID Read
When enabled, the Right Scan / Left Scan key functions as the RFID tag reader
trigger. See the “MX3-RFID Reference Guide”.