User's Manual

192 Cisco Client Configuration
MX3X Reference Guide E-EQ-MX3XRG-H
Cisco Client Configuration
Prerequisites
• Network SSID or ESSID number of the Access Point
• WEP or LEAP Authentication Protocol Keys
Aironet Client Utility (ACU)
Access: Start | Aironet Client Utility or ACU Icon on Desktop
Note: When making changes to profile parameters, the mobile device should be warmbooted
afterwards. Cisco options are available on the MX3X and MX3-RFID devices.
Figure 5-23 Cisco Aironet Client Utility
Note: To configure WPA, please see “Cisco Configuration”, later in this chapter.
Profiles Tab See the following “Profiles Tab” section for default profile parameter
settings..
Firmware Tab Displays the current firmware version and allows you to load new
firmware. Tap the Browse button to locate the new firmware file.
Status Tab Immediately runs status on : signal strength and signal quality.
Statistics Tab Select the Receive Stats or Transmit Stats. The data is displayed on the
screen.
Survey Tab Immediately runs signal strength and quality and link speed. An option
is available to Setup parameters for Active Mode reporting.