User's Manual

Error Messages 251
E-EQ-MX3XRG-H MX3X Reference Guide
Message Explanation and/or corrective action Level
Read registry failure-Internet The Internet registry entry is missing or empty. This is
not considered an error since the Internet value is not
necessary to launch and lock the application.
LOG_ERROR
Registering Backdoor MSG The AppLock system communicates with the keyboard
hook via a user defined message. Both AppLock.exe and
Kbdhook.dll register the message at initialization.
LOG_PROCESSING
Registering Hotkey MSG The applock system communicates with the keyboard
hook via a user defined message. Both Applock.exe and
Kbdhook.dll register the message at initialization.
LOG_PROCESSING
Registry read failure at reenter user
mode
The registry has to be read when entering user mode is
the AppName is missing. This user mode entry is
attempted at boot and after a hotkey switch when the
administrator has closed the application being locked or
has changed the the application name or command line.
LOG_ERROR
Registry read failure at reenter user
mode
The registry has to be read when switching into user
mode. This is because the administrator can change the
settings during administration mode. The read of the
registry failed which means the Administration key was
not found or the AppName value was missing or empty.
LOG_ERROR
Registry read failure The registry read failed. The registry information read
when this message is logged is the application
information. It the Adminstration key cannot be opened
or if the AppName value is missing or empty, this error
is logged. The other application information is not
required. If the AppName value is not available,
AppLock cannot switch into user mode.
LOG_ERROR
Reset system work area failure The system work area is adjusted when in user mode to
cover the taskbar area. The system work area has to be
adjusted to exclude the taskbar area in administration
mode. AppLock was unable to adjust this area.
LOG_ERROR
Shift pressed The Shift key has been pressed and trapped by the
HotKey processing.
LOG_EX
Shift Processing the hotkey and backdoor entry LOG_EX
Show taskbar The taskbar is now being made visible and enabled. LOG_PROCESSING
Switching to admin-backdoor The system is currently in user mode and is now
switching to admin mode. The switch occurred because
of the backdoor key presses were entered by the
administrator.
LOG_PROCESSING
Switching to admin-hotkey press The system is currently in user mode and is now
switching to admin mode. The switch occurred because
of a hotkey press by the administrator.
LOG_PROCESSING
Switching to admin-kbdhook.dll not
found
The keyboard hook load failed, so Applock switches to
admin mode. If a password is specified, the password
prompt is displayed and remains until a valid password
is entered.
LOG_PROCESSING